Brushless quad copter full#
Brushless quad copter Bluetooth#

One motor had no brass washer under the circlip, and all motors had too much slop, but the motor shafts are very hard and its easy to remove almost all slop (instead of adding washers) by gripping the shaft in pliers and rotating the motor bell. I'm still tuning parameters as I learn to fly a quad with some newbie issues in Horizon mode, but ACRO mode is smooth and surprisingly like flying a collective pitch heli.ģ020 props supplied are ABS and unbalanced, but maybe 5 minutes of shaving plastic off the topside has a prop nearly perfectly balanced. Eventually flashed latest Betaflight 3 and the default PIDs worked pretty well, and I finally discovered how surprisingly aggressive this thing can be. My only previous quad is a CX10 (currently down for repair after my dog caught it) and after a crash course in MultiWii and reading the various 'DX6i Super-X won't arm' threads got it airborne with throttle travel set to +125%-125%.ĭon't know what firmware it came with but my first flights were on Baseflight, then flashed Cleanflight 3.2.1 for a while but lack of experience left me with PID tuning issues. You'll have leftover motor screws and four extra nylock nuts. No assembly instructions, and differs from videos in using modular arm screws to mount the FC instead of the brass standoffs, but assembly is pretty straightforward once you lay out parts. Currently supplied with a MWC 32-X flight controller (NaZe32 ACRO clone) it has no GPS/MAG/BARO installed, but can be retrofitted. My first proper quadcopter after a few years of flying helis, the Super-X brushless is an excellent first hobby grade quad. The Spektrum and DSM2/DSMX brand is a trademark of Horizon Hobbies USA.Ģ) This is not an underground black market fake Spektrum product. Onboard linear voltage step-down circuit (5v/500ma, for 2s lipo)ġ) This is not a Spektrum DSM2/DSMX product, nor is it a copy of a Spektrum DSM2 product.Onboard DC/DC voltage boost circuit (5v/500ma, for 1s lipo.6 motor outputs that power the ESC directly.Integrated DC/DC voltage booster/Step down for 5v 1~2 cell operation.Included FTDI tool for radio and flight modes setup.

Brushless quad copter full#

Full featured micro MWC flight controller.

Brushless power system for longevity and power.

The Super-X is simply the most advanced and powerful Micro Quad-copter in its size class. The kit also comes with a matched FTDI tool for setting up your TX and flight modes.

The PNF Kit comes with two 300mah Batteries providing 8 minutes of flight and can easily handle a 600mah for over 12 minutes of flight.

This Super –X Micro, with its full feature power is perfect for 3D and FPV use.

Brushless quad copter Bluetooth#

The FC has support for GPS, OLED and Bluetooth options, and has 6 motor outs for up to a Hex configuration. It has the normal 6050MPU, but also has an integrated 7ch DSM2 compatible receiver built in, supporting not only the standard flight modes and carefree modes as well. It comes with 2 sets of 75mm props and full mounting hardware for a quick and easy build.įor the FC or flight controller, it is a full-featured, micro-sized MWC. Starting off with a durable full carbon 1.6mm thick one piece 125mm frame, it is matched with 4, 6400kv 3 gram brushless motors and 3A ESC’s providing double the thrust of its own weight!! Best of all it’s fully plug and play with micro connectors. This little Connection Ready quad, comes with everything but a DSM2 compatible transmitter to get you up in the air and is a breeze to assemble with no soldering or gluing. The Super-X Micro Quad is the first Full function micro-sized brushless Quad-Copter using Hobby grade components.